https://hertechknowledgy.com/?p=1663

Modern vehicles have manual transmissions that are commonplace So, a large number of drivers may know the mechanisms of these kinds of autos. It’s same even if your car isn’t.
The parts are the primary item you should learn regarding manual transmission mechanics in cars. They are:

*The clutch
* Clutch pedal
*Flywheel
*Synchronizers
*Collars
*Selector Fork
* The gears
*Output shaft
*Layshaft

That’s how manual transmission mechanics work. After coming to a complete stopping point, the driver is required to depress the pedal of their clutch. The clutch pedal will be activated when the throw-out roller press against the diaphragm spring and releases it from between the pressure plate and the flywheel. The gearshift is moved to the desired location. This causes the collar fork of the selector and the fork between the first and second gears to move into 1st gear. While the throttle is being lightly applied, the clutch pedal can be released by using one foot. The foot on the right continues to apply more throttle. You must perform this step several times in order to change gears. When the vehicle is stopped take the clutch off and put the gearshift into neutral.
wirwha7ojb.